Satellite Internet forum

Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl VSAT technology and installation >> iDirect Forum: hubs and terminals >> DHCP Enable and Configure https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1191690761 Message started by wesambhaya on Oct 6^th, 2007 at 6:12pm

Title: DHCP Enable and Configure
Post by wesambhaya on Oct 6^th, 2007 at 6:12pm

Happy Day
How can I activate the DHCP of 3100 router and set it
Thank you very much for helping

Title: Re: DHCP Enable and Configure
Post by VbGuy on Oct 23^rd, 2007 at 5:45pm

I think this can be done from your service provider, he control everything about the modem remotly...

Or you can save the Option file to your pc and try to modify it , but you may be blocked cause you made changes without they know (service provider) .

Title: Re: DHCP Enable and Configure
Post by TDMAMike on Oct 23^rd, 2007 at 6:02pm

Call your service provider. They control everything (pretty much).

Title: Re: DHCP Enable and Configure
Post by Y2J on Nov 7^th, 2007 at 1:06pm

As they said, this could be done by the Service Provider, and you should use iBuilder to do this. Even if you edited manually it will not work unless it's matched with the configured settings in the hub site.

If you an ISP, this is a different story, you may have alook to this picture to get an idea :

Title: Re: DHCP Enable and Configure
Post by TTnC_pyr8 on Nov 19^th, 2008 at 7:37pm

To enable DHCP on your modem, you don't need service provider to do this or ibuilder. Just open opt file in notepad and paste this block in there, make the ip range that of the modem ip. give yourself however many ips you need. and save file and reload opt and your all good to go. thats until the hub resends your modem a new opt file. then they will most likely remove the dhcp, but they wont know and you just get the latest opt file they sent down and remodify and reload and your all setup till next time.

[DHCP_1]
dhcp_mode = 1
dhcp_lease_seconds = 43200
dhcp_lease_range = 69.69.69.1-69.69.69.10
dhcp_dns_server_ip = use and dns server from web
dhcp_dns_server2_ip = google for a root dns ip
dhcp_gateway_ip = modem ip address