Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> Netmodem II Plus Problem or ISp
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1193046523

Message started by alexashinze on Oct 22nd, 2007 at 10:48am

Title: Netmodem II Plus Problem or ISp
Post by alexashinze on Oct 22nd, 2007 at 10:48am
Hello Good day. My modem takes too much time to lock TX then NET. sometimes as much as 2hrs. on re alignment I got signal strength of 16.8v. My snr is 11.6.
What cld be my problem pls.

Title: Re: Netmodem II Plus Problem or ISp
Post by Oasis Networks on Oct 22nd, 2007 at 12:06pm
what version do you have?

Title: Re: Netmodem II Plus Problem or ISp
Post by TDMAMike on Oct 22nd, 2007 at 12:08pm
Sounds like you are properly pointed.  

My guess is that your initial power is set either too HIGH, or too LOW in your options file and your busrts are arriving at the hub either above, or below the UCP parameters (Uplink Control parameters) defined in the config at the Hub.  

You need to talk with the provider and determine the best setting.  I am almost certain that this is the case. Most HNOs have their UCP set to 9 or 10 db C/N (Sweet spot). If you arrive too high or too low from that value you arent getting in.  

NMII+s are legacy modems.  You might want to consider upgrading if it is in your budget.

Title: Re: Netmodem II Plus Problem or ISp
Post by alexashinze on Oct 26th, 2007 at 1:27pm
Thanks man. I am most grateful. Let me get across to my ISP. Thanks

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.