Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> Net Modem II Plus, Improper Boot-up https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1198871261 Message started by wuch on Dec 28th, 2007 at 7:47pm |
Title: Net Modem II Plus, Improper Boot-up Post by wuch on Dec 28th, 2007 at 7:47pm
Condition #7, Boot-up sequence:
Improper Boot-up sequence observed via the ‘Console Port’ Indication: NetModem hangs or displays errors during boot-up sequence Possible Cause(s): 1. Improperly loaded/corrupted Application, Images or Options files 2. Incompatible software versions loaded Corrective Action(s): 1. Reload Application, Images or Options files as required 2. Reload compatible Application, Images or Options files as required Well, and after I has read a lot of manuals for iDirect Net Modems and without find the solution, I keep wondering, how can i make any of this two "Corrective Actions", can somebody tell me how I can do that? |
Title: Re: Net Modem II Plus, Improper Boot-up Post by TDMAMike on Dec 29th, 2007 at 3:14am
I havent been in a NMII+ (and its PEACOCK process) in a long time (at least 4 years).
I am not going to be of much help. I would start with a reimage and fresh options file if you can break into that boot sequence. I use to remember how, way back when. |
Title: Re: Net Modem II Plus, Improper Boot-up Post by wuch on Dec 29th, 2007 at 7:18pm
Well, the solution was so easy, i did not know that, when the modem hangs and stay on the boot loader console, it continues being with the ip connectivity, and then i can connect using the isite as admin (using the p@55w0rd! without mattering what password has been set on the modem, ;D i'm new in this), and then reload the new options file, application, images or whatever, if needed, and that was all.
thanks to everyone that did help me (TDMAMike, ahmelect)... |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |