Satellite Internet forum

Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl VSAT technology and installation >> iDirect Forum: hubs and terminals >> Distributed NMS https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1202468161 Message started by Lukio on Feb 8^th, 2008 at 10:56am

Title: Distributed NMS
Post by Lukio on Feb 8^th, 2008 at 10:56am

Hi Guys,

Anyone run a distributed NMS? We're looking to upgrade one of our hubs to iDS V8 and possibly running distributed NMS. I know sweet F.A. about it at the moment and was wondering if anyone is doing this and if there are any release notes from iDirect with a fuller explanation?

Cheers,

Lukio ;.)

Title: Re: Distributed NMS
Post by TDMAMike on Feb 8^th, 2008 at 11:50am

If you have a large customer base, it will difinitely take the load off that E366 or E3550 (single) NMS server. �8.0 is memory and processor intensive (memory especially) so you should definitely consider 1) Distributed NMS or 2) adding memory to your current box. �

Other than that, I havent heard anything bad about it. �I know iDirect was working a redundancy feature for it, but I am not sure if it is out yet (it may be, I am not sure).

Title: Re: Distributed NMS
Post by Lukio on Feb 8^th, 2008 at 3:30pm

Ideal thanks Mike ;.)
I'll have a look round the TAC site and see if I can find any documentation. Think it's definately worth looking at for future proofing our networks/hub.

Lukio.