Satellite Internet forum

Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl VSAT technology and installation >> iDirect Forum: hubs and terminals >> isite version 8.0.1 https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1202491166 Message started by jamal2000 on Feb 8^th, 2008 at 5:19pm

Title: isite version 8.0.1
Post by jamal2000 on Feb 8^th, 2008 at 5:19pm

hello every one

please I need to Isite version 8.0.1

Title: Re: isite version 8.0.1
Post by Lukio on Feb 8^th, 2008 at 6:06pm

Dude, you will need to speak to your HNO. They should be able to give it to you. Don't think that this software is available on the open Internet.

Lukio.

Title: Re: isite version 8.0.1
Post by TDMAMike on Feb 9^th, 2008 at 12:27am

Agree with the above. It more than likely hasnt been hung on the open internet.

Title: Re: isite version 8.0.1
Post by ahmelect on Feb 22^nd, 2008 at 8:21pm

What is the new characteristics have this version?

Title: Re: isite version 8.0.1
Post by TDMAMike on Feb 23^rd, 2008 at 1:22am

ahmelect wrote on Feb 22^nd, 2008 at 8:21pm:

What is the new characteristics have this version?

Of 8.0.1? (or 8.0.2.1?)

Wow, I dont even know where to start. There was a wave of change with 8.0:

1. Group QoS
2. TDMA Direct Sequence Spread Spectrum (Comms on the Move)...and the ability to build an 8350 SS remote.
3. Ability to lock a remote to a specific inbound (upstream carrier). For troubleshooting purposes, etc.
4. A new entry for the general info tab of the remote to register the nodes 1dB compression point.

The above are just a few features that are offered with 8.0.1. 8.0.2.1 had a few changes as well.

8.2 is right around the corner and it is really crazy It is the first of the iDS's to allow the build of the eVOLUTION family. Too many things to list.....trust me, iDirect has some HUGE features on the way....

Title: Re: isite version 8.0.1
Post by ahmelect on Mar 2^nd, 2008 at 12:41pm

Hi TDMA,

Can u advice us with all feture 8.0.2 inclouded? if u have a benifits links..

Title: Re: isite version 8.0.1
Post by TDMAMike on Mar 2^nd, 2008 at 1:20pm

8.2 should be released in the next few weeks and will be the first to allow the eVOLUTION family to be built (thru iBuilder GUI).

There are a lot of subtle changes to the iDS particularly in the GUIs (too many to list). Some of the highlights include:

1. Ability to build eVOLUTION (as stated above)
2. STBY card relationships within the networks have changed considerably!
3. HNOs now have the flex to run SS inbounds with star inbounds in the same inroute group (varying topologies in the same inroute group).
4. Freq hop mesh (no more carrier grooming in a single inbound for mesh). Mesh remotes will now be able to share multiple inbounds.
5. SkyMonitor - SPECAN integrated into iMonitor GUI. (it is pretty nifty).

The above is the tip of the iceberg. 9.0 is coming and fast. It will bring a plethora of capability.