Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> how can know my network mush is it work
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1205661907

Message started by aih007 on Mar 16th, 2008 at 10:05am

Title: how can know my network mush is it work
Post by aih007 on Mar 16th, 2008 at 10:05am
i want how can check  or test my network mush is it ok or down by telnet for modem idirect 3100

Title: Re: how can know my network mush is it work
Post by TDMAMike on Mar 16th, 2008 at 8:59pm
You mean MESH?

Title: Re: how can know my network mush is it work
Post by aih007 on Mar 17th, 2008 at 6:40am
yes i mean mesh

Title: Re: how can know my network mush is it work
Post by TDMAMike on Mar 17th, 2008 at 10:40am
If you are running a mesh topology, simply ping to the other mesh node.  The round trip should be less than 1 second (example 700-800ms).  

If you are passing thru the hub your icmp will be approx 1.1 seconds. (1100ms).  

Most mesh networks are around 700-800 ms (RT node to node).

Title: Re: how can know my network mush is it work
Post by aih007 on Mar 18th, 2008 at 8:00am
thanks mr for reply my ask
but i can do this test (ping ) with point to point also

Title: Re: how can know my network mush is it work
Post by TDMAMike on Mar 18th, 2008 at 10:39am
You definitely want to ping point to point (pinging the other satellite router within your mesh network).

Title: Re: how can know my network mush is it work
Post by aih007 on Mar 20th, 2008 at 10:14am
i did ping from onther site on my site and give me time=1409 ms time=1310 ms
is this problem or normal ?
nots : the site not be mesh with my site mesh

Title: Re: how can know my network mush is it work
Post by TDMAMike on Mar 20th, 2008 at 10:46am
Are both nodes in a MESH inbound?  

With your present round trips (ICMP) you are passing thru the hub and the payload is not mesh.  If it were mesh, you would see values in the 700-800ms range.

Title: Re: how can know my network mush is it work
Post by aih007 on Mar 20th, 2008 at 11:03am
yes mr the node is not a MESH inbound (did ping from it)
is another network .
but is this round trips normal 14099 ms -1310 ms if not mesh ?

Title: Re: how can know my network mush is it work
Post by TDMAMike on Mar 22nd, 2008 at 12:00am
Having a hard time understanding what you are saying.  

Are the remotes in a Star (standard) network or are they in a mesh network?

With the round trips you are stating/seeing, those remotes are NOT in a MESH (remote to remote without traversing the hub) network/environment.  

Mesh payloading averages 700-800 ms (round trip).  Whereas if those same two remotes were in a star network (passing thru the hub) those round trips would be 1200ms+

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.