Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> Download Package via HyperTerminal and winscp
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1215412882

Message started by smelethil on Jul 7th, 2008 at 7:41am

Title: Download Package via HyperTerminal and winscp
Post by smelethil on Jul 7th, 2008 at 7:41am

Hi all

How i can download Package via Hyperterminal and winscp to infinty modems

Pls in details

Title: Re: Download Package via HyperTerminal and winscp
Post by TDMAMike on Jul 7th, 2008 at 11:55am
What version iDS?

The process will take some time to type..and I wont be able to get to it this morning.  Possibly this evening.  

You should consider getting ahold of iDirects PDF "Recovering Infiniti Remotes."  It would save a lot of typing.

Title: Re: Download Package via HyperTerminal and winscp
Post by smlt_vsat on Jul 7th, 2008 at 1:22pm
ids version is 7.0.2 ..i hve the docs but i m confused in sme areas.


Title: Re: Download Package via HyperTerminal and winscp
Post by TDMAMike on Jul 7th, 2008 at 10:44pm
That document explains the process pretty good.  What is it that you dont understand?

Title: Re: Download Package via HyperTerminal and winscp
Post by smlt_vsat on Jul 8th, 2008 at 8:15am
Mr.Mike

i have ibuilder and imonitor manuals with me . Could you provide some documents related to hub management,troubleshooting,(inculding commands), i mean to troubleshoot /Monitor PP and NMS servers vis console (Linux Based)

Thanks in advance.

Smltl

Title: Re: Download Package via HyperTerminal and winscp
Post by TDMAMike on Jul 8th, 2008 at 11:53am
Such manuals (bona-fide troubleshooting manuals) do not exist.  What does exist are operator manuals, tech bulletins, and bug notices.   It sounds like you have those.  

Title: Re: Download Package via HyperTerminal and winscp
Post by - Siva - on Jul 10th, 2008 at 3:01am
1. Connect Remote with your PC by Cisco console cable and turn on the Remote.
2. Use Hyper Terminal or other applications and login to Remote.
3. Use “ifconfig” command, which will give you the IP Address of the remote.
4. Configure your PC LAN IP with same subnet as Remote and connect a “Straight cable”.
5. Make sure, you can ping from PC to Remote.
6. Use iSite to download package and option file into Remote (hope you know how to use iSite).
7. If you still want to use WinSCP to download image, you must use “Recovery Procedure” and follow the steps given in that.
Hope this helps..!

Title: Re: Download Package via HyperTerminal and winscp
Post by wesambhaya on Jul 26th, 2008 at 12:28pm
Hello
See the following excellent documents:

1- https://www.link-sat.org/Recovery%20iDirect%20Modems/Console%20Port%20Adapter%20Revision%20121505.pdf

2- https://www.link-sat.org/Recovery%20iDirect%20Modems/How%20Do%20I%20Recover%20a%20Stranded%20Netmodem%20II+.pdf

3- https://www.link-sat.org/Recovery%20iDirect%20Modems/Recovering%20Infiniti%20Modem.pdf

4- https://www.link-sat.org/Recovery%20iDirect%20Modems/RedBoot%20Recovery.doc

Title: Re: Download Package via HyperTerminal and winscp
Post by TDMAMike on Jul 26th, 2008 at 1:56pm
The above are recovery procedures and have nothing to do with the rlock function.  

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.