Satellite Internet forum

Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl VSAT technology and installation >> iDirect Forum: hubs and terminals >> how do i define CIR on the HUB https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1216135430 Message started by Bonib1 on Jul 15^th, 2008 at 4:23pm

Title: how do i define CIR on the HUB
Post by Bonib1 on Jul 15^th, 2008 at 4:23pm

Hello i am runing version 8.0.2 and i would like to configure CIR and MIR on my upstrean carrier.

Title: Re: how do i define CIR on the HUB
Post by TDMAMike on Jul 15^th, 2008 at 7:59pm

Are you a remote user or Hub Network Operator?

Title: Re: how do i define CIR on the HUB
Post by - Siva - on Jul 16^th, 2008 at 2:58am

8.0.2 comes with GQoS. I hope better to read/understand the concept before play with it. Also, I belive there are GQoS Trainings available to understand... how to configure.. how it works..etc..!

Title: Re: how do i define CIR on the HUB
Post by Bonib1 on Jul 16^th, 2008 at 9:37am

I am a HUB operator.
i know that there is a new feature in Ver' 8.0.2 for GQOS but i am talking aabout that, i simply want to define for all of my remotes MIR,CIR.
Yoni

Title: Re: how do i define CIR on the HUB
Post by TDMAMike on Jul 16^th, 2008 at 12:31pm

Individual remote MIR/CIR is set from the QOS tab of iBuilder (for the targeted remote). �It is enabled just below the traffic profiles by checking the box on the downstream or upstream (or both) and entering the desired KBps in the text box. �Once completed, you will reboot (push) the unit for the changes to become effective. Realize that if you configure a remote for CIR BW you are literally slicing off (virtual) BW from your Upstream carrier and making it exclusive to THAT remote if he desires it. When he is not using it, it will remain available for use by other users.

As for Group QoS, I believe the first opportunity define CIR/MIR in the GQoS hierarchy is at the Applications Group. � Which may be your desired intent...but I am not sure of you application.

Title: Re: how do i define CIR on the HUB
Post by Bonib1 on Jul 16^th, 2008 at 3:33pm

I may have not explained my self i want to configur the MIR to all of my remotes not only one or two

Title: Re: how do i define CIR on the HUB
Post by TDMAMike on Jul 17^th, 2008 at 2:01am

I am not sure if you can group edit MIR's for multiple remotes. I will have to try it before I recommend it. I know you can group edit certain items (RFT, General Info, etc).....but I am not certain about MIR.

Title: Re: how do i define CIR on the HUB
Post by - Siva - on Jul 17^th, 2008 at 9:59pm

At iBuilder -> Goto View -> Select Details -> Selects the remotes which you want to change MIR (at RH side) -> Right Click and Modify -> Select QoS Tab -> Click "Enable" at Max Info Rate and Input the BW in kbps -> Click "OK" -> Apply Configuration (Hub-Side).
Now you set the MIR for selected Remotes.
Please try with One of your co-located Remote..!! before apply to all remotes at Network..!

Hope this helps..!

Title: Re: how do i define CIR on the HUB
Post by TDMAMike on Jul 18^th, 2008 at 12:13pm

The Hub side push is necessary for the downstream side. If the intent is to configure MIR on the upstream you will also see changes pending on the remote side.....which will require a service interruption when pushed. �

If you push the upstream changes with Remote-side TCP (reliable) the interruption will be about 45-50 seconds, as it will only reboot/restart falcon.

M