Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> iDirect HUB training
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1219318429

Message started by ito on Aug 21st, 2008 at 12:33pm

Title: iDirect HUB training
Post by ito on Aug 21st, 2008 at 12:33pm
Hello,

We would like know what kind of trainning , we must take  for  installing and managing  the iDirect HUB

thanks

Title: Re: iDirect HUB training
Post by TDMAMike on Aug 21st, 2008 at 3:01pm
https://www.idirect.net/cs/support/training_solutions
https://www.idirect.net/cs/support/training_courses

Recommend attending in this order:
1. IOM course
2. Advanced Course
3. GQoS Course

Also recommend a linux course and a CCNA course as well, as you will require such skills to be successful in Hub Management/Network Operations.  It is also recommended that you have a strong background in Satellite theory and VSAT networks if your intent is to be successful.

Title: Re: iDirect HUB training
Post by craighanna on Jan 17th, 2011 at 12:43pm

ito wrote on Aug 21st, 2008 at 12:33pm:
Hello,

We would like know what kind of trainning , we must take  for  installing and managing  the iDirect HUB

thanks

To be able to work with HUB management, installation and troubleshooting, knowledge of CCNA is an asset. Firebrand Training currently deliver a 5 day CCNA course: https://www.firebrandtraining.co.uk/courses/cisco/ccna_2007.asp
There’s also a very helpful manual you can find from Advapro.

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.