Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> HughesNet and Hughes HX VSATs >> Piece milling a Hughes system https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1219421315 Message started by JonnyRotten on Aug 22nd, 2008 at 5:08pm |
Title: Piece milling a Hughes system Post by JonnyRotten on Aug 22nd, 2008 at 5:08pm
I have a 1.2 meter dish leftover from a previous room mate, a new 1 watt LNB (NJR2784H), and a lightly used DW7000. I found this BUC assembly on eBay.
https://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140259134769&ssPageName=ADME:B:WNA:US:1123 Would I be able to piece it all together and have a working system that I could potentially use with BW or would I have a unique system that holds down the tarp on my roof? |
Title: Re: Piece milling a Hughes system Post by USN - Retired on Aug 22nd, 2008 at 8:07pm
You've got your terminology all jumbled up. The device on eBay is a TRIA; Transmit-Receive Integrated Assembly. Technically, it's everything you need to park out on the end of a feedarm; BUC/LNB/waveguide/OMT/etc. But - every TRIA needs to be mated to any given dish with a specific feedarm/strut set. It has to do with focal length and take-off angle. Plus, I think you need 2w where you're at.
I'd leave that one set on eBay if I were you //greg// |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |