Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> iMonitor 7.0.5 for CNO https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1221480630 Message started by LAKHDARIAHUB on Sep 15th, 2008 at 1:10pm |
Title: iMonitor 7.0.5 for CNO Post by LAKHDARIAHUB on Sep 15th, 2008 at 1:10pm
dear all
i need iMonitor softwar Separated from nms_client for CNO user, Best regards |
Title: Re: iMonitor 7.0.5 for CNO Post by dot on Sep 15th, 2008 at 4:21pm
A CNO is a software license you have to buy and install on your NMS. If you give the customer iMonitor only they will still have access to the Probe tab in iMonitor and if they have a copy of iBuilder will still be able to use it. Third and most important, they will be able to see the remotes and network components. The CNO license allows you to restrict what they have access to see.
|
Title: Re: iMonitor 7.0.5 for CNO Post by LAKHDARIAHUB on Sep 16th, 2008 at 10:04am
we have the license CNO, and the CNO is activated, but I need to install software iMonitor only to the customer.
Are there iMonitor v 7.0.5 software separately. |
Title: Re: iMonitor 7.0.5 for CNO Post by Y2J on Oct 8th, 2008 at 7:08am
As I far as I know, you can install the full NMS_Client and then remove the iBuilder.exe and iSite.exe as well and then compress the folder in a zipped file then pass it to your CNO and it should work.
I am saying this because I tried to use All of iDS components (iBuilder,iSite, iMonitor) under Linux using Wine and it works flawlessly with Fedora and Ubuntu. |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |