Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
Service Providers >> Satellite Connection in Africa >> My SNR is low with 1.8m do i need 2.4m anten https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1225142736 Message started by papayeya on Oct 27th, 2008 at 9:25pm |
Title: My SNR is low with 1.8m do i need 2.4m anten Post by papayeya on Oct 27th, 2008 at 9:25pm
Dear Eric, Members,
Am looking to buy a 2.4m antenna in order to gain the required SNR to work on NSS6 Ku - MEA beam in southern Sudan. I've tested the site with 1.8m Andrew Ku Tx/RX antenna and my SNR on my SatMeter was: 9dB am looking to get SNR value of: 12 - 13dB it should be enough to work with the ISP The site coordinates are: Longitude(deg min sec E/W) 32d 21.02' E Latitude(deg min sec N/S) 10d 32.35' N Altitude 390m My question is Can i get the required SNR if we upgraded it to 2.4m brand new antenna. If yes, which one is better for us is it: 1- Prodelin 2.4m ku Tx/Rx Technical Specifications: https://www.satcomnow.com/satcom/pdf/Prodelin_1251.pdf Or 2- Andrew 2.4m ku Tx/Rx Technical Specifications: https://www.satcomnow.com/satcom/pdf/Type243K_ClassIII.pdf Best Regards Ahmed N. Musa |
Title: Re: My SNR is low with 1.8m do i need 2.4m anten Post by Space on Jan 8th, 2009 at 8:37pm
Would you like to change provider and use IS-10? We have best rates and great service on KU.
Regards Space |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |