Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> iDirect 3100 TX Light
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1225870215

Message started by Justin on Nov 5th, 2008 at 7:30am

Title: iDirect 3100 TX Light
Post by Justin on Nov 5th, 2008 at 7:30am
What does it mean when the TX light located on the front of the modem does not come on when setting up a system.

Title: Re: iDirect 3100 TX Light
Post by TDMAMike on Nov 5th, 2008 at 11:53am
No Tx Light:

1. System may not be "activated" in the NMS at the hub
2. System does not know where it is geographically located (read: isnt getting GPS NMEA to calculate its fame start).
3. Downstream SNR (C/N) may be extremely low (under 5.5) and is not enough to unmute the TX on the iDirect

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.