Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> Dish pointing and alignment >> need help with my hotbird setup
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1229977245

Message started by superted on Dec 22nd, 2008 at 8:20pm

Title: need help with my hotbird setup
Post by superted on Dec 22nd, 2008 at 8:20pm
hello there guys  
i had hotbird intsalled 2 yrs ago for art sport the problem is that the box that was used has now been switched of for over a year and when i found out that epl is coming back to art sport i fired the system back up again the screen told me there was a poor or no signal. my question is has something moved or changed in the past year like satellite alignment or the box has reset to manufactures settings can anyone help  
many thanks.

Title: Re: need help with my hotbird setup
Post by Eric Johnston on Dec 24th, 2008 at 12:29pm
Check here https://www.lyngsat.com/hotbird.html that the program you want exists.  You should be able to receive many programmes.  

It is unlikely that the box has reset itself but if you are certain it has then it may have an autotune/search mode which will take 20 minutes or so to scan the entire satellite frequency range and polarisations and  build a new database.   Don't do this till you have a good signal on one carrier - which you can tune manually using a sample from the lyngsat data.

Moisture and corrosion of the pin and the inside of the cable at the LNB F connector are a likely cause of signal deterioration if the antenna is still fixed solid in its bracket.  The aluminium film braid may have turned to powder over several feet length inside the cable sheath.

Happy Christmas, Eric.


Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.