Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> how the reset command work?
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1243108647
Message started by backtrack on May 23rd, 2009 at 8:57pm

Title: how the reset command work?
Post by backtrack on May 23rd, 2009 at 8:57pm
hello guys

how to reset the idirect 3100 from telnet the command says:

usage:
reset [board|application]

what i must replace [board|application]


thank in advance

Title: Re: how the reset command work?
Post by TDMAMike on May 23rd, 2009 at 10:49pm
reset board - resets everything, redboot and falcon.  Boot time, approx 3 - 1/2 minutes.

reset application - will only reset the falcon process (if you are an iNFINITI customer). Falcon is the process tied to your options file. The unit will not go through a full redboot when reseting falcon.  Boot time is approx 40-45 seconds.

Title: Re: how the reset command work?
Post by backtrack on May 24th, 2009 at 12:36am

wrote on May 23rd, 2009 at 10:49pm:
reset board - resets everything, redboot and falcon.  Boot time, approx 3 - 1/2 minutes.

reset application - will only reset the falcon process (if you are an iNFINITI customer). Falcon is the process tied to your options file. The unit will not go through a full redboot when reseting falcon.  Boot time is approx 40-45 seconds.


thank you

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.