Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> i need idirect command guide https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1243186445 Message started by backtrack on May 24th, 2009 at 6:34pm |
Title: i need idirect command guide Post by backtrack on May 24th, 2009 at 6:34pm
hello guys
i know i'm asking too much but i really need it all idirect commands that excuted through telnet i know by typing help i got commands list but i need the description for each one thank you |
Title: Re: i need idirect command guide Post by TDMAMike on May 27th, 2009 at 12:10pm
I will be honest, unless anyone has them in a "working" document, it is unlikely that anyone will take the time to scratch them out. If someone was to start detailing each of them, the result would be a small book by the time your were done describing each of them, their applicablity, and what they are used for.
Reason I say that, is they CHANGE with iDS progression and model types. Some boards have link encryption and offer a mesh capability, other models may be capable of S2 and ACM, which drives another list of commands. Recommend you put a test bed together, with a "canary" remote and use it to run various commands against. If you have iSupport you can contact the TAC and ask for an explaination of what a certain command does/yields. |
Title: Re: i need idirect command guide Post by backtrack on May 27th, 2009 at 2:56pm
hello Mike
first of all thank you for the great help you offer. remember the thread about putting another option file diffrent from mine after some tries i got tx & net leds working i mean not flashing as i got in the first try. although i can't got internet connectivity there is some thing missing after i check my friend option file parameters (who subscribe in the same isp of mine) i found that is 50% similar to mine except the following groups: [MODEM_PARAMETERS] [ACQUISITION_PARAMETERS] [UCP] [TIMEPLAN] [SPOOF] [ENC] [NET_ENC] so what is parameters refer to? another question my modem now is unlocked can i use my option file to unlock my friend modem which is the same model as mine the same isp the same satellite (Express) |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |