Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> How I can lock my remote https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1246502164 Message started by DIVONA_RM on Jul 2nd, 2009 at 3:36am |
Title: How I can lock my remote Post by DIVONA_RM on Jul 2nd, 2009 at 3:36am
Dear all,
i want to lock all my remotes t o my iDirect HUB, how i can do that ? |
Title: Re: How I can lock my remote Post by Scout on Jul 3rd, 2009 at 7:14pm
If you have access to the iDirect TAC support site you can download any of the version 8 or 7 iBuilder user guides, they will show you how to use RLOCK, if you are using an earlier version you will need to upgrade, the process is not difficult, but please read the instructions and follow closely the section on keeping the serial number and password information in a safe location.
If you don't want to look through, send a mail to TAC asking them for RLOCK instructions. |
Title: Re: How I can lock my remote Post by was2006 on Jul 6th, 2009 at 9:11am
Hi,
How to identify iDirect 3100 modem has locked to particular network. Can it identify using config file. (opt file) |
Title: Re: How I can lock my remote Post by Scout on Jul 6th, 2009 at 10:22am was2006 wrote on Jul 6th, 2009 at 9:11am:
access the remote using telnet and simply type the command >rlock Type this with no arguments and it will show you the current status - locked or not. |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |