please help me my moden lan port is not coming up but when i enter through console i get this report

i need your help

DRAM Test       ................                                
DRAM Test Successful                    
+No network interfaces found                            



tarting falcon_monitor: OK

ixp425_eth: Error reading MII reg 0 on phy 0
ixp425_eth: Error reading MII reg 0 on phy 1
ixp425_eth: Error reading MII reg 0 on phy 2
ixp425_eth: Error reading MII reg 0 on phy 3
ixp425_eth: Error reading MII reg 0 on phy 4
ixp425_eth: Error reading MII reg 0 on phy 5
ixp425_eth: Error reading MII reg 0 on phy 6
ixp425_eth: Error reading MII reg 0 on phy 7

iDirect Linux 2.4.24-uc0-iDirect0
Kernel 2.4.24-uc0-iDirect0 on an armv5b

iDirect login: ixp425_eth: Error reading MII reg 0 on phy 0
ixp425_eth: Error reading MII reg 0 on phy 1
ixp425_eth: Error reading MII reg 0 on phy 2
ixp425_eth: Error reading MII reg 0 on phy 3
ixp425_eth: Error reading MII reg 0 on phy 4
ixp425_eth: Error reading MII reg 0 on phy 5
ixp425_eth: Error reading MII reg 0 on phy 6
ixp425_eth: Error reading MII reg 0 on phy 7
Direct Linux 2.4.24-uc0-iDirect0
Kernel 2.4.24-uc0-iDirect0 on an armv5b

iDirect login: ixp425_eth: Error reading MII reg 0 on phy 0
ixp425_eth: Error reading MII reg 0 on phy 1
ixp425_eth: Error reading MII reg 0 on phy 2
ixp425_eth: Error reading MII reg 0 on phy 3
ixp425_eth: Error reading MII reg 0 on phy 4
ixp425_eth: Error reading MII reg 0 on phy 5
ixp425_eth: Error reading MII reg 0 on phy 6
ixp425_eth: Error reading MII reg 0 on phy 7



ese

Is this a 3100 iDirect unit? If not, what model is it?  Also, what iDS version are you using?

1.  Can you telnet 0 from console?  (doubtful)
2.  Look at your options fiel in notepad and confirm whether or not it matches the software version on your iDirect unit.


There is obviously something wrong with eth0 of that unit.  It could be your options file or the port could be dead entirely.  

brother open up your idrect 3100 modem fallow up the lines to a ic called halo 3 check prbly if its not blown up if it is then thts why ur lan port don t work gud day