Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> HughesNet and Hughes HX VSATs >> 4W with HN7000s ? https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1249806564 Message started by Alkan CIT on Aug 9th, 2009 at 9:29am |
Title: 4W with HN7000s ? Post by Alkan CIT on Aug 9th, 2009 at 9:29am
can we integrate HN modem with 4W based on HN7740S or even HN7000s
|
Title: Re: 4W with HN7000s ? Post by USN - Retired on Aug 9th, 2009 at 12:09pm
Hughes recommendations for the HN7700S series
Ku-band 1w or 2w C-band 2w Ka-band 1w, 2w, or 3.5w Spec sheet on the 7740 doesn't mention radios, but it stands to reason they'd be the same for both modems. A point to consider, is that I've personally never seen a 7000 series power adapter rated higher than 80 watts AC. And that one's listed as supporting only the 2w TIGRIS transmitter. Therefore a 4w BUC would probably have to be self-powered, which then creates the potential for power level control issues between modem and transmitter //greg// |
Title: Re: 4W with HN7000s ? Post by Alkan CIT on Aug 9th, 2009 at 12:35pm
correct me if I am wrong; it’s not a recommendation for HN7000s or even HN7740s to use 1W or 2W. its a must, We cannot integrate any other BUCs with the HN series. even in case we got 2W from NJR as an example it will not work. am I right?
is there any arrangement should be done before using higher BUCs than 2W from other supplier? |
Title: Re: 4W with HN7000s ? Post by USN - Retired on Aug 9th, 2009 at 7:49pm
If you provide me with a bonafide email address, I'll send to you the Hughes documentation from which I derived the above power adapter vs modem information
//greg// |
Title: Re: 4W with HN7000s ? Post by Alkan CIT on Aug 10th, 2009 at 8:19am
please find below the email: abdoulla.elgazzar@alkancit.com
thank you. |
Title: Re: 4W with HN7000s ? Post by USN - Retired on Aug 10th, 2009 at 12:56pm
email with attachments sent
//greg// |
Title: Re: 4W with HN7000s ? Post by Mwafrika on Oct 1st, 2009 at 10:35am
Could you also send me the document at: nmuttai@commcarrier.com
|
Title: Re: 4W with HN7000s ? Post by A.Walker on Oct 1st, 2009 at 12:52pm
Hi BW here
You cant integrate any 7000 to my knowledge without using teh Hughes 2 watt Radio, w ehave a HX200 that works with all BUcs but you would need to susbcribe to our service , if you need to know more you can contact us Anthony@bentleywalker.com |
Title: Re: 4W with HN7000s ? Post by USN - Retired on Oct 1st, 2009 at 1:05pm Mwafrika wrote on Oct 1st, 2009 at 10:35am:
Copies of two emails previously sent to Alkan CIT are now on the way to that address //greg// |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |