Satellite Internet forum
VSAT technology and installation >> iDirect Forum: hubs and terminals >> TX Levels

Message started by bukkieboy on Nov 13th, 2009 at 5:09pm

Title: TX Levels
Post by bukkieboy on Nov 13th, 2009 at 5:09pm
I am having problems with the TX levels on my Evolution X3 with Bentley walker the RX levels are fine but I am told that the Tx levels are low

I have not had this problems before could some one help me out

My email is

Title: Re: TX Levels
Post by TDMAMike on Nov 13th, 2009 at 8:34pm
I would recommend working this directly with their NOC.  It is hard to say how close you are to your one dB compression point, so it is best to work it thru them.  You may have some additional power margin available, so call them.

Title: Re: TX Levels
Post by tunde300us on Nov 15th, 2009 at 12:50pm
U mean to say your TX level is too high i guess.Like mike said i think its something you have to work out with bentley walker.
What is the size of ur antenna and was a 1db test done ? if it was done before i think maybe you should do it again

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.