Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> Hub and VSAT satellite equipment for sale and wanted >> Hughes DirectWay hub needed https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1258453655 Message started by zybemima on Nov 17th, 2009 at 10:27am |
Title: Hughes DirectWay hub needed Post by zybemima on Nov 17th, 2009 at 10:27am
Hi,
I am looking for used Hughes DirectWay hub in rather small configuration. Best regards, Zygmunt Ochman z-ochman@ttcomm.pl |
Title: Re: Hughes DirectWay hub needed Post by Amalenka on Nov 20th, 2009 at 9:42am
After an upgrade of our hub we have following components available:
I. ISBN HUB HW 1) SYSDIST-230V System IF Distribution 230V 2 off 2) NETDIST-230V Network IF Distribution 230V 2 off 3) IFEXP-RKCE-220V Inroute BCD Expansion Rack 4 Chas 1 off 4) BCDCE Inroute BCD for all modulations 27 off 5) SLIM-ETHERNET Super LIM – Ethernet 5 off 6) 7220-1100-DPC1 Data port Cluster (with 4 Line interfaces RS232) 3 off 7) MIB-GATEWAY-CESPR MIB Gateway – CE approved 2 off 8 ) NCC2-UNIV NCC2 3 off 9) 4046 BPSK/QPSK MODEM Hughes 4046 BPSK/QPSK Modem 3 off II) DPCEE (DMN) HUB HW 1) DPCEE-P2SATGAT Satelite GW (DVB-S) 2 off 2) DPCEE-P2CACSERV CAC Server 2 off 3) DPCEE-P3IP-2WAYDAT IP Gateway 1:1 redundant 2 off 4) DPCEE-P2QMPCMON QMPC Monitor 1off 5) Radyne Modulator Radyne ComStream DVB 3030 Modulator 2 off An order of complete configuration is preferable but we accept oders of single items, too. |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |