Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> setting vlan https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1259744477 Message started by ydh on Dec 2nd, 2009 at 9:01am |
Title: setting vlan Post by ydh on Dec 2nd, 2009 at 9:01am
Hi,
I want to implement vlan on my network. I'm operating infinity HLC ids 6.097 and 3100 remotes. does anybody have instruction what parameters should be set on cisco upstream switch? Thank's Yudha |
Title: Re: setting vlan Post by ScotlandTDMA on Dec 3rd, 2009 at 10:59pm
Yudha
The upstream switch is a basic configuration. you setup each port to connect to the equipment PP's EDAS NMS etc and setup the defualt Vlan 1 which is configured through the NMS system routers etc. The PP's need to be trunk ports as with the switch connection to the router. apart from that you should be fine. ScotlandTDMA |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |