Hi friends
I have a iDirect 3100 modem. It was a break of energy while I was changing the password. The modem death.
Today it dont respond to any key of PC. The is connect to PC with a RJ45-DB8 cable Ok.
I read that with lan I can to access to modem,  How I do this? I dont have a IP of modem.

Please gurus, I need your help.
Thank you in advance

If you can connect to PC, login to the modem, then type laninfo, it will display the IP Address. Or try using iSite if it'll will detect the modem.

Regards.

1505 wrote on Jan 29^th, 2010 at 9:10am:

If you can connect to PC, login to the modem, then type laninfo, it will display the IP Address. Or try using iSite if it'll will detect the modem. Regards.

No, friend, The modem dont accept any command or key of keyboard of PC.

Just some ideas...

Serial console port:
Hyperterminal config - COM1 9600 8 None 1 None
Press enter a few times and you should see command prompt, then telnet 0.
Exception: Mobile remotes use 4800 bit/s.

Ethernet LAN port (not sure this will work!):
Do any LEDs on the ethernet sockets flash, modem or PC, when RJ45 cable is connected ?  If flashes are observed then some packets may be being sent. If packets are being sent then Wireshark should be able to decode any packets from the modem. Look to see the "From" IP address of the modem. Then guess the subnet mask... If the IP address is some generic base 10.0.1.1 or 192.168.0.1 the 255.255.255.0 is likely.  If an unusual IP then try 255.255.255.252 etc with 248, 240, 224, 192, 128 in the last position.

Wireshark download here: https://www.wireshark.org/download.html

Best regards, Eric.

Thanks, I will test  soon.