Satellite Internet forum

Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl VSAT technology and installation >> iDirect Forum: hubs and terminals >> iMonitor's Acknowledgement issue https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1265766329 Message started by satkdjp on Feb 10^th, 2010 at 1:45am

Title: iMonitor's Acknowledgement issue
Post by satkdjp on Feb 10^th, 2010 at 1:45am

Hi,
On iMonitor(ver 8.3.1), what should we do to clear (Ack) the sound tempolarily if the alarms and warnings would occur?

We couldn't ack by pushing "Acknowledgement button" on iMonitor...

Of course, I can clear the sound by pushing the "speaker mark" on iMonitor for all time!

It is urgent.

Regards,

Title: Re: iMonitor's Acknowledgement issue
Post by dot on Feb 10^th, 2010 at 7:18am

Hi Satkdjp

You may want to read the iMonitor User Guide as there is a lot of information in there on Audio Notifications. In short you can use the Results -> Audio Notification menu item to customise the sounds and Results -> Audio Notification -> Properties to configure repeats and duration of the sounds.

Title: Re: iMonitor's Acknowledgement issue
Post by satkdjp on Feb 12^th, 2010 at 4:37am

Thank you for your kindness.

As you mentioned, of course we can configure the repeats and duration of the sound.

However, we would like to acknowledge the alarm by pushing the "Acknowledgment button" or other method.

We would like to do as below order.

1.an Alarm occur
2.iMonitor sound an alarm repeatedly (1 sound /10s)
3.I acknowledge the alarm (clear the sound)
4.the new alarm occur
5.iMonitor sound an alarm repeatedly (1 sound /10s)
6.I acknowledge the alarm (clear the sound)