Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> Remote low rx level <1dB
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1277691201

Message started by fluffymassive on Jun 28th, 2010 at 3:13am

Title: Remote low rx level <1dB
Post by fluffymassive on Jun 28th, 2010 at 3:13am
Hi All,

We have a remote that is working in our netowrk with a very low rx snr of about 1dB. Sometimes this goes into the negate and stll runs.
has anyone else experienced this? What have you done to fix it?

Cheers,
-Mark

Title: Re: Remote low rx level <1dB
Post by 1505 on Jul 1st, 2010 at 9:14am
Have you:-

- Re-pointed the site, for max gain?
- Done Compression + Isolation test ?

Regards.

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.