Satellite Internet forum
VSAT technology and installation >> iDirect Forum: hubs and terminals >> iDirect X3

Message started by HelloWorld on Jul 6th, 2010 at 10:14pm

Title: iDirect X3
Post by HelloWorld on Jul 6th, 2010 at 10:14pm
Hi Eric

I am Presently working on iDirect evaluation X3 modem. m unable to login to modem through iSite or telnet, only posibe way is hyper terminal.

how can i resolve this issue ?

Title: Re: iDirect X3
Post by Eric Johnston on Jul 6th, 2010 at 11:30pm
I'm not really the person to ask I have never worked with iDirect, so maybe others can help.

As I understand it, for ethernet connection, you need your PC connected directly to the modem.  Don't try via a LAN/router etc.

For serial communications you will need to get set bit rate, stop bits, data bits and parity correct.  I don't have the manual to hand.

Best regards, Eric.

Title: Re: iDirect X3
Post by Scout on Jul 8th, 2010 at 8:10pm
Can you give more info?  
Unable to login through iSite/Telnet could be due to the password in the options file.  
The Linux level password and the iSite/Telnet passwords can be set independently.

Title: Re: iDirect X3
Post by imNAK on Jul 20th, 2010 at 10:50am
as you mention that you unable to login to x3 evolution
if your password is correct and you connected to the modem then there is a problem with option file or with the pakg  mostly if the o/f is not for a pakg that not able to login .. conform the akg and find a option file for that and load it via hyperterminal .. hope its work


Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.