Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> LinkStar Forum: VSAT hubs and terminals >> Viasat Linkstar HUB for Sale
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1280437902

Message started by PowrrrPlay on Jul 29th, 2010 at 10:11pm

Title: Viasat Linkstar HUB for Sale
Post by PowrrrPlay on Jul 29th, 2010 at 10:11pm
Purchased Linkstar HUB in 2005 and used for 18 months.  Has integrated outbound packet shaper. Complete with NMS in Linkstar inbound/outbound racks.  Easily upgrade the NMS and add DVBS2 modulator.  5 inbound linkstar modems, one never used.  For more information contact me.

Title: Re: Viasat Linkstar HUB for Sale
Post by Hussain_Jawwad on Oct 26th, 2010 at 8:13am
Dear PowrrrPlay,
I am also using Linkstar Viasat hub since 2006. I am also looking for another Linkstar Viasat Hub used. Can you plz email the price and technical details of the hub on my email.
hussain_jawwad@yahoo.co.uk
or plz tell me ur contact details so that I will contact you.

Thankx,
Jawwad

Title: Re: Viasat Linkstar HUB for Sale
Post by TheVsatKing on Jul 31st, 2011 at 6:16pm
I have a Linkstar hub for sale.

The complete system was installed in a climate controlled and power protected network environment last running a network of approximately 40-50 sites. The complete system electronic components or units are all pretty much packaged back in their original boxes maybe apart from a few devices that packaged appropriately for shipping and are packed onto 2 separate pallets. The system with all original documentation and software was dismantled carefully and packaged for storage or shipment last year.

List of Equipment

Uplink Chain:

•      1 x 19 inch Equipment Rack
•      1 x ViaSat DVB Modulator, Newtec NTC2177 ( SN: 03081118 )
•      1 x Skystream Networks IP Encapsulator  - version 4.3.1 (SN: N2647)
•      1 x Brandywine Communications GPS8 Satellite Synchronous Time and Frequency Standard (SN: 6759)
•      1 x GPS Antenna
•      1 x Cisco 3660 Router - version C3660-ik9s-mz.122-28.bin (SN: CNMGEB0ARA)
o      2 x Fast Ethernet ports on motherboard
o      2 x plugin blades, each with 2 x Fast Ethernet ports
•      Cisco Catalyst 3550 series Ethernet Switch (SN: CAT0732Z1SF)
•      1 x NetEnforcer AC-302 Bandwidth Manager (SN: 995297) – version 4.2.4 build 11u1

Downlink Chain:

•      1 x 19 inch Equipment Rack inc Rx IF Distribution system
•      1 x ViaSat Timing Distribution Unit (SN: AA11147977)
•      3 x GCU Receivers (SN: 30174, 30178, AP11163381)
•      1 x Catalyst 3550 series Ethernet Switch (SN: CAT0709Y072)

Network Control:

•      LinkStar Software Version – 1.0.8.16
•      3 x Sunblade 2000 Server (UltraSPARC-II) – P/N 602-2297-01 (RNCC, NCC, TCP Acc) (SN: 307AD233F, 324AD2DF1, 310AD1E24)
o      900 MHz CPU
o      Sun PGX64 Graphics Card
o      Sun StoreEdge DVD10X
o      72GB SCSI HDD
o      1 GB RAM
o      SunOS Release 5.8
•      1 x 17 inch CRT monitor, keyboard and mouse (sn: 0000431-0313MH1032)
•      1 x NTI 8 port KVM Switch (SN: 47?)
•      1 x Compaq PC inc 17 inch monitor, keyboard and mouse (NMS) SN: MXD32402XL, 1746SAC48602877)

Please let me know if you need any further details.

Sincerely,
Grover Thomas
Vsat Communications Specialists Inc.
1090 Queensgate Drive
Smyrna, GA 30082
Phone: 1-678-517-4269

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.