Satellite Internet forum

Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl VSAT technology and installation >> iDirect Forum: hubs and terminals >> accessiblity from the remote site https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1293704603 Message started by sushilpandey212 on Dec 30^th, 2010 at 10:23am

Title: accessiblity from the remote site
Post by sushilpandey212 on Dec 30^th, 2010 at 10:23am

Hi all,

Thanks a lot for earlier suggestions on my queries. I now have a task ahead, i need your suggestions for the same.

I have a remote iDirect site which works with a 3100 serious of router. I want to access the main hub site i.e. the NMS from this remote site. How can I make this possible?

Hope for the speedy reply.

Have a good day.

With Best Regards,

Sushil Pandey.

Title: Re: accessiblity from the remote site
Post by TDMAMike on Dec 31^st, 2010 at 12:13am

Is this 3100 series remote attached to a VSAT that is connected to the hub? Active in the network?

If so, hang a client on from that 3100 series and use the NMS (GUI) clients to access the primary NMS at the Hub. The satellite latency will be a bit painful, but it's manageable.

Title: Re: accessiblity from the remote site
Post by sushilpandey212 on Dec 31^st, 2010 at 5:04am

could you please elaborate the process please.

Yes, the remote is active.