Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> iDirect X3 Net Led Issue !
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1296715949

Message started by yazzdan on Feb 3rd, 2011 at 6:52am

Title: iDirect X3 Net Led Issue !
Post by yazzdan on Feb 3rd, 2011 at 6:52am
Dear All,

I Have a problem with some remotes of X3. Problem is that the X3 terminal receive properly , Tx light is also green but net LED have no responce , what will be the possible cause for this issue ?

Regards,

Yazzdan

Title: Re: iDirect X3 Net Led Issue !
Post by Oasis Networks on Feb 3rd, 2011 at 7:03am
Hello,

There could many reasons for it. To help find the right reason, please transmit a CW and make sure the teleport sees this carrier on the right frequency, polarity and power. If they dont see it - there is some problem with your tranmission (cable, BUC, polarity or maybe even pointing, especially in Ku).

If they do see it - make sure the teleport configured the modem into the network and that it is not locked..

Title: Re: iDirect X3 Net Led Issue !
Post by yazzdan on Feb 3rd, 2011 at 7:22am
Dear Oasis,

We already Done UAT on one particular remote now we can say the transmit patch is ok .. but still issue remains the same as Net LED have no response.

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.