| Satellite Internet forum | |
|
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> X3 alaram Explannation https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1313214024 Message started by andyflower on Aug 13th, 2011 at 6:40am |
|
|
Title: X3 alaram Explannation Post by andyflower on Aug 13th, 2011 at 6:40am
Hi,
My X3 remote was giving the following error on iMonitor this afternoon... Type: lat_timeout Details: Stopped receiving echo reply from (that remote serial) Can someone please explain what might have went weired! |
|
Title: Re: X3 alaram Explannation Post by dot on Aug 13th, 2011 at 4:50pm
Andy
I understand that this error is reported by the latency server (LAT) on the NMS when it does not get ICMP responses back from the remote. Possible causes could be a congested network, interference, solar outage, incorrect QOS configuration or something wrong with your satellite router at that time. If the problem is transient then you should start recording the details of traffic at that time on the entire network and look for reasons why the outage occurs. If it is constant then you have a more serious problem and you may want to get iDirect's TAC have a look at your network. |
|
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |