Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> Satellite dish installations - pictures and descriptions >> Avanti Hylas install.
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1327173910

Message started by europe-satellite.com on May 18th, 2011 at 10:09pm

Title: Avanti Hylas install.
Post by europe-satellite.com on May 18th, 2011 at 10:09pm
An Avanti Hylas install using a 74cm Prodelin Ka dish, a 1 W Hughes ODU and a Hughes HN9200 modem.



Step 1, installing the 60mm pole on the wall of the house.


Step 2, Put the dish on the pole.


Step 3, mounth the arm and ODU and connect rx/tx cables.


Step 4, aling the dish to the satellite (Hylas-1, 33,5W)


Step 5, finish modem activation/setup, system ready.


Step 6, test the system.


Step 7, clean the site.


Ku, Ka and C band VSAT sales, install and maintenance Worldwide.

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.