Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> Dish pointing and alignment >> Help please on Monopulse tracking https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1338271974 Message started by satnew on May 29th, 2012 at 7:12am |
Title: Help please on Monopulse tracking Post by satnew on May 29th, 2012 at 7:12am
Dear All,
Does anyone have a detailed procedure to perform a monopulse tacking using Vertex ACU model 133? 1. I was able to point at the satellite successfully, performed step tracking. 2. I have the ephemeris table of the satellite and can do Optrack, charge using the ephemeris table. Problem comes when performing monopulse tracking. The antenna just keeps moving away from the bore sight. Antenna is 13m. Thanks |
Title: Re: Help please on Monopulse tracking Post by Eric Johnston on May 29th, 2012 at 10:12am
Overview:
https://www.gdsatcom.com/Controls/Data%20Sheets/Model-133T.pdf For the operations and maintenance manual go here: https://www.gdsatcom.com/controls_ac.php and email them asking for the manual, advice, and help. It is perhaps worth checking that the antenna feed is a monopulse design, with multiple LNAs. Best regards, Eric. |
Title: Re: Help please on Monopulse tracking Post by satnew on Jun 6th, 2012 at 8:30am
Thank you Eric. I am in contact with the GDSatcom guys.
|
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |