Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> Traffic load balancing using multiple modems https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1352394920 Message started by saiahmed on Nov 8th, 2012 at 5:15pm |
Title: Traffic load balancing using multiple modems Post by saiahmed on Nov 8th, 2012 at 5:15pm Hi, I have a high datarate/TCP session requirements in one of my site and we would like to install 4 iDirect modems connected to a ME3400 switch at the remote end. What would be the best way to perform the load balancing so that the total traffic / TCP sessions are equally balanced over these 4 iDirect WAN circuits? At the remote end, we have /24 subnet which will be used by the customer. Is it possible to have that same /24 subnet added as a static route to all of these 4 modems? If yes, then how the iDirect hub will perform the path selection and load balancing? Please share your thoughts... Thanks, Saiahmed |
Title: Re: Traffic load balancing using multiple modems Post by Anton on Mar 18th, 2013 at 9:04pm
you can use cisco routers to perform policy-based routing or any L3 load balancers.
|
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |