Satellite Internet forum

Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl VSAT technology and installation >> iDirect Forum: hubs and terminals >> How to load linux image using winscp into idirect https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1365241937 Message started by ralphlinkus on Apr 6^th, 2013 at 10:52am

Title: How to load linux image using winscp into idirect
Post by ralphlinkus on Apr 6^th, 2013 at 10:52am

Hello great people.I have a problem with my idirect x3 modem.after several time of loading option file thru the command line prompt.I cannot use isite to connect to the modem with the username and password provided.I suspect the linux software is corrupt.Can someone give me step by step method to load new linux image to my idirect. Thanks and expect you reply.

Title: Re: How to load linux image using winscp into idir
Post by SuperDave on Apr 8^th, 2013 at 2:12pm

Ralph,

I emailed a couple pdf's from the iDirect TAC for recovery and using the reset button option on the X3. I wouldve posted here but the pdf's are easier to read.

Hope this helps!

Title: Re: How to load linux image using winscp into idir
Post by ralphlinkus on Apr 8^th, 2013 at 5:11pm

OK. Thank you.I will check and get back.