Satellite Internet forum

Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl Anything else >> General and other topics >> How to Check Open ports on a router https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1370522597 Message started by martin.amara on Jun 6^th, 2013 at 1:43pm

Title: How to Check Open ports on a router
Post by martin.amara on Jun 6^th, 2013 at 1:43pm

Dear Mr. Eric

We have installed HN 9260 satellite router for one of our customer. Now this customer has internet services and trying to connect remotely to a VPN server. Customer is unable to connect. Provider says all ports are open. The terminal is assigned public IP. Is it possible to check open ports on that satellite modem installed at customer site and verify that all UDP and TCP ports are open. Tried port scanner but it shows only port 80 available.

Martin

Title: Re: How to Check Open ports on a router
Post by Eric Johnston on Jun 6^th, 2013 at 3:54pm

I don't know the answer.

Maybe someone from Bentley Walker can help ?

Anyone else help please ...

Best regards, Eric.

Title: Re: How to Check Open ports on a router
Post by USN - Retired on Jun 6^th, 2013 at 8:44pm

Might be a latency problem. It's my understanding that HN-xxxx and DW-xxxx customers desiring acceptable VPN and/or VOIP service need optional accelerator service from those providers who are actually equipped to provide it

//greg//

Title: Re: How to Check Open ports on a router
Post by martin.amara on Jun 7^th, 2013 at 1:19pm

Is there any specific method or software we can use to verify open ports.

Martin