Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> Connect via ftp to modem idirect
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1395422398

Message started by Jose F. on Mar 21st, 2014 at 5:19pm

Title: Connect via ftp to modem idirect
Post by Jose F. on Mar 21st, 2014 at 5:19pm
hi,

I want to connect from my imonitor machine to one remote modem through ftp, I am using the winscp. 
From imonitor I connect to the modem and in the command line I type "service sshd start" the answer is "ok", then I start winscp, in the hostname field  I write the IP of the modem, the username and password,  in File Protocol I choose SFTP. After doing that, I click on login and I get the message that you can see in the picture that sent as an attachment.

I hope you can help me, thanks in advance

Dibujo.JPG (24 KB | 337 )

Title: Re: Connect via ftp to modem idirect
Post by fluffymassive on Mar 25th, 2014 at 12:32am
Hi,

I notice that you are using the username 'admin'. To access the modem you will need to use the 'root' username and password combination.

Cheers,
-Mark

Title: Re: Connect via ftp to modem idirect
Post by Jose F. on Apr 6th, 2014 at 1:17am
Hi,

Fluffymassive thank you so much!!! finally I could do it

Title: Re: Connect via ftp to modem idirect
Post by fluffymassive on Apr 7th, 2014 at 2:17am
no problem. glad to help!

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.