Satellite Internet forum

Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl VSAT technology and installation >> iDirect Forum: hubs and terminals >> CPU and Memory usage in Protocol Proccessor, NMS, and Upstream/Tunnel Switch https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1397101585 Message started by Marcell1987 on Apr 10^th, 2014 at 4:46am

Title: CPU and Memory usage in Protocol Proccessor, NMS, and Upstream/Tunnel Switch
Post by Marcell1987 on Apr 10^th, 2014 at 4:46am

How much large of usage (the limit of usage: how much precent) of CPU and Memory of
1. PP
2. NMS
3. Upstream Switch
4. Tunnel Switch
that can be accepted to make sure that the iDirect system is working well ?
:(

Title: Re: CPU and Memory usage in Protocol Proccessor, NMS, and Upstream/Tunnel Switch
Post by fluffymassive on Apr 10^th, 2014 at 8:28am

I suggest you ask the idirect TAC regarding these questions as they could be different depending on the version you are using.

However, this would depend on:
-how many remotes are on the network
- TCP connection limits
- traffic type
-vlans
- routing used
- etc..

Title: Re: CPU and Memory usage in Protocol Proccessor, NMS, and Upstream/Tunnel Switch
Post by Marcell1987 on Apr 10^th, 2014 at 9:40am

Big thanks and regards :)