Satellite Internet forum | |
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> iDirect Forum: hubs and terminals >> iDirect e8350 GPS settings on options file https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1481573737 Message started by onthemove on Dec 12th, 2016 at 8:15pm |
Title: iDirect e8350 GPS settings on options file Post by onthemove on Dec 12th, 2016 at 8:15pm
I have an application where I am trying to send RSSI and TDM lock signals to a DVB receiving satellite pointing device via the e8350 GPIO port. That portion is working for me fine, but I need to receive a NMEA string into the GPIO port from the DVB pointing device.
Not having iBuilder available myself is a hindrance, so what should I put in the options file to make the GPIO expect the NMEA string on pin 4? I have already figured out the handshake signalling for the RSSI and the is_mobile option. Unfortunately, OpenAMIP is not an option to get around this. The iDirect TAC is sparse on fine details like this. |
Powered by YaBB 2.5.2! YaBB Forum Software © 2000-. All Rights Reserved. |