Satellite Internet forum
https://www.satsig.net/cgi-bin/yabb/YaBB.pl
VSAT technology and installation >> Hub and VSAT satellite equipment for sale and wanted >> Probecom Standard C Band Linear Diplexer
https://www.satsig.net/cgi-bin/yabb/YaBB.pl?num=1554365106

Message started by probecom on Apr 4th, 2019 at 9:05am

Title: Probecom Standard C Band Linear Diplexer
Post by probecom on Apr 4th, 2019 at 9:05am
Probecom standard C band linear diplexer is a mass produced microwave component it is precisely machined with close tolerance and fine in consistency   
This is only a typical example of Probecom microwave component , a range of diplexers can be machined and supplied from probecom either in mass production or individual needs,click each item for more details: C band, Ku band, DBS band, Ka band, X band, Dual bands, Tri bands.
Advantage of probecom microwave component lies in:
      Precision machining ensures production dimension tolerances are close to each other and keeps production fine in consistency .
      High quality and competitive price.
      Always keep a safety stock, once PO is cut, shipment can be send out in real time.
      Real time global delivery in 4 working days
      Sincere pre-sales & after sales service

Hot sale of this month: 1.2M Ku Band Manual Flyaway Antenna, simply click item for more information, and contact  sales@probecom.cn for price and detailed information.

Welcome to visit our website
www.probecom.com


_________1.png (153 KB | 38 )

Title: Re: Probecom Standard C Band Linear Diplexer
Post by Admin1 on Apr 4th, 2019 at 3:43pm
With this new model is it allowed to undo the low frequency receive port 90 deg bend and reattach it other way round so the opening is facing away from the feed? This might make it easier to install a transmit reject filter before the LNB.

Eric

Title: Re: Probecom Standard C Band Linear Diplexer
Post by probecom on Apr 9th, 2019 at 3:47am
Hi Eric, thanks for asking ,not sure yet, i check with our engineer then reply you.

Title: Re: Probecom Standard C Band Linear Diplexer
Post by probecom on Apr 9th, 2019 at 6:44am
Hi Eric, thanks for asking ,not sure yet, i check with our engineer then reply you.

Title: Re: Probecom Standard C Band Linear Diplexer
Post by probecom on Apr 11th, 2019 at 3:07am
Hi Eric, i have checked with our engineer, the product in the photo is custom design,  we can machining it like you said in the reply above. thank you very much for asking.

Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-. All Rights Reserved.