Dear All,

During the recovery procedure I loaded a zImage found it in my PC to a different X3 modem after that I get Kernal Panic as follows.

Can you help to recover this X3 modem.

Many Thx




Platform: iDirect iDS Platform (XScale)
Copyright (C) 2004, 2005  iDirect Technologies, Inc.

Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x10000000, [0x0001c540-0x01fd1000] available
FLASH: 0x50000000 - 0x52000000, 256 blocks of 0x00020000 bytes each.
== Executing boot script in 5.000 seconds - Press <Space Bar> to abort


RedBoot> fis load linux

RedBoot> exec -c "root=/dev/mtdblock2 console=ttyS1,9600 single"

Using base address 0x01600000 and length 0x00100000
Uncompressing Linux.............................................................
...... done, booting the kernel.
Linux version 2.4.24-uc0-iDirect0 (root@gimli) (gcc version 3.3.2) #1 Thu Sep 18
09:45:12 EDT 2008
CPU: XScale-IXP4xx/IXC11xx revision 2
Machine: iDirect Phoenix Platform
alloc_bootmem_low
memtable_init
Security risk: creating user accessible mapping for 0x51000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS1,9600 single
Calibrating delay loop... 266.24 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62572KB available (1678K code, 471K data, 72K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI: bus0: Fast back to back transfers enabled
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0xff000003 (irq = 15) is a XScale UART
ttyS01 at 0xff001003 (irq = 13) is a XScale UART
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
No RedBoot partition table detected in IXP425 Flash
Using static MTD partitions.
Creating 2 MTD partitions on "IXP425 Flash":
0x00040000-0x00440000 : "image"
0x00440000-0x00fc0000 : "user"
pktgen.c: v1.3: Packet Generator for packet performance testing.
pktgen: Error: your machine does not have working cycle counter.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 320 bytes per conntrack
ip_conntrack_pptp version $Revision: 1.1.1.1 $ loaded
ip_nat_pptp version $Revision: 1.1.1.1 $ loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  https://snowman.net/proje
cts/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Other stuff added by David S. Miller <davem@redhat.com>
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Cannot open root device "mtdblock2" or 1f:02
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 1f:02

I am not expert on this, but this document may help:

https://helpdesk.talia.net/otrs/public.pl?Action=PublicFAQZoom;Subaction=DownloadAttachment;ItemID=32;FileID=11

If anyone can help please contribute here....

Dear Admin,

Thank you for your reply.

I have these files.

My issue is my Linux Kernal is corrupted I guess.

First I need to fix my Kernal, then I can use these documents.


BR

Ahmed Musa