Satellite Internet Forum.
Please note that this forum is now READ ONLY and closed for login and changes
The new forum is here Space and Satellite Communications forum

Welcome, Guest.
Welcome to this satellite broadband discussion forum.  Wherever you are and whatever your problem we are here to help each other. Connecting to the internet via satellite is not always easy but is critically important to those in remote places or with poor terrestrial infrastructure.  Both service providers and customers are encouraged to contribute.  Read the Forum rules.
      Satellite internet forum          

Avanti Hylas install.

(Read 3330 times)
Ex Member

May 18th, 2011 at 10:09pm  
An Avanti Hylas install using a 74cm Prodelin Ka dish, a 1 W Hughes ODU and a Hughes HN9200 modem.

Step 1, installing the 60mm pole on the wall of the house.

Step 2, Put the dish on the pole.

Step 3, mounth the arm and ODU and connect rx/tx cables.

Step 4, aling the dish to the satellite (Hylas-1, 33,5W)

Step 5, finish modem activation/setup, system ready.

Step 6, test the system.

Step 7, clean the site.

Ku, Ka and C band VSAT sales, install and maintenance Worldwide.
Back to top
« Last Edit: Oct 26th, 2011 at 5:55pm by N/A »  
IP Logged