New Satellite Signal Level Meter for WildBlue

Attn: Wild Blue/Telesat Satellite Installers

Applied Instruments has launched a new satellite signal level meter that LOCKS on and identifies the Anik F2 111.1W bird for WildBlue/Telesat.

This Super Buddy also identifies the relevant geographic specific WildBlue spot beam based on your zip code.

Applied Instruments also offers a voltage converter, Model Blue Bunny, that allows you to completely align the WildBlue dish/antenna without being tied to the modem inside the house or building. The WildBlue dish setup requires 28V and since signal level meters only provide 18V, the Blue Bunny upconverts the voltage to make your life easier.

Feel free to contact Scott Haywood at Applied Instruments at 317-782-4331 or shaywood@appliedin.com if you have any questions.
https://www.appliedin.com

FYI.

***NOTE: The Blue Bunny Voltage Step Up is only compatible with WildBlue TRIAs manufactured by UMA in Taiwan. Please refer to the tag on the bottom of your TRIA to see if it's compatible with the Blue Bunny Voltage Step Up. If it says Made in Taiwan by UMA, then it is compatible. If it says Made in Korea by Ko Space, then it is NOT compatible.***

Here is the webpage that provides the exact specs of the Blue Bunny:

https://www.appliedin.com/www/assets/products/Blue_Bunny/bluebunny_DataSheet.pdf

If you have any questions about this, please contact Scott Haywood at 317-782-4331.

Thanks.
Scott Haywood
Applied Instruments, Inc.
https://www.appliedin.com