iDirect status LED, what's going on ? !

(Read 2037 times)

maxfire2020

Member
★★
Offline

Posts: 29

Jan 23^rd, 2008 at 5:34am

hello
i have big problem for first time in my life (very strange problem )
i have idirect 3100 and 2.4 antainaa �i upgrade the modem software to 7.1.1
and i note the status light is off (before always on)and
im useing the isite 7.1
to tray to point the antainaa i didn't get any signal even lees the 2 like no LNB at all when i use the telnet(RX SNR) im getting 0.3000
only maximum i get 2.8 when im tray �to point hard �after i start �the process �im getting 0.3000 again

im trying to lock intellsat 904 in C band circuler polarizer also �the satellite covering my area
im using norsat 8515 LNB

pleas if any one have any information about this problem
replay to me any advice are welcome 2

« Last Edit: Jan 27^th, 2008 at 1:54pm by Admin1 »

IP Logged

maxfire2020 Member ★★ Offline Posts: 29	Reply #1 - Jan 25^th, 2008 at 8:06am hello i get the solution for that problem its the firewall to get the signal just tun off he firewall completely and open port number 9001 and 9002 UDP its simple like that about the status light gos off when you upgrade to ver 7.*** and that mean it normal and ok i hope this information will help some one
Back to top	IP Logged

Pages: 1

Send Topic | Print

Disclaimer, Terms of Use and Privacy Forum User Agreement Forum rules Cookie policy.