Pages: 1

MRTG and iDirect

(Read 11469 times)

novalino Member ★★ Offline Posts: 3	Nov 5^th, 2008 at 12:58pm sorry sir,maybe I will disturb you for moment. I have problem in iDirect snmp to mrtg,. mib rxtcp&txtcp can't load to mtrg server,. I have tried it but that tools doesn't work precedure instalation i have done but still doesn't work can u show me the way,please.... my softwere 7.0.1.2 thank you
Back to top	« Last Edit: Mar 18^th, 2009 at 8:10am by Admin1 » IP Logged

Ex Member Ex Member	Reply #1 - Nov 5^th, 2008 at 4:12pm Is the snmp server (snmpsvr) running on the NMS (at the hub?)
Back to top	IP Logged

novalino Member ★★ Offline Posts: 3	Reply #2 - Nov 18^th, 2008 at 9:22am snmpsvr running,. OID .1.3.6.1.4.1.13732 respon but OIDs 1.3.6.1.4.1.13732.1.4.1.1.2/8 not respon
Back to top	IP Logged

Ex Member Ex Member	Reply #3 - Nov 18^th, 2008 at 12:09pm There is a document published by iDirect specifically for piloting MIBs to MRTG. Have you read that document?
Back to top	IP Logged

novalino Member ★★ Offline Posts: 3	Reply #4 - Nov 24^th, 2008 at 8:24am hi MIke, I have followed for steps to piloting MIBs to MRTG.but still doesn't work & MRTG displayed was blank there's no traffic thank's
Back to top	IP Logged

Ex Member Ex Member	Reply #5 - Nov 24^th, 2008 at 12:22pm Have you followed the instructions on page 184 and 185 of the iMonitor user guide. It starts with modifying the filename snmpd.conf with vi editor (file location # cd /etc/snmp/ )
Back to top	IP Logged

Mistergigi Member ★★ Offline Posts: 1	Reply #6 - Dec 10^th, 2008 at 7:12pm I have the same problem, did someone solved the issue?
Back to top	IP Logged

Ex Member Ex Member	Reply #7 - Dec 11^th, 2008 at 2:12am The only thing I was recommending, was to ensure that the procedures for enabling SNMP were being followed.
Back to top	IP Logged

taivna Member ★★ Offline Posts: 8	Reply #8 - Mar 18^th, 2009 at 4:58am Please response me. Dears, I work in service company. I'm just starting my carier in this company. So my first mission is installing and preparing MRTG for the work. And i need help. i need installation's information about MRTG in idirect for my server. /redhat/ My best regards My contact is : taivna.b@gmail.com So please guide me.
Back to top	YIM IP Logged

Ex Member Ex Member	Reply #9 - Mar 18^th, 2009 at 11:05am Do you have an iSupport agreement with iDirect TAC? If so, there is a document on the TAC website specifically for piloting MIBs to MRTG.
Back to top	IP Logged

taivna Member ★★ Offline Posts: 8	Reply #10 - Mar 19^th, 2009 at 2:21am i have iSupport agreement. But i can't find this file. you give me link pls
Back to top	YIM IP Logged

Ex Member Ex Member	Reply #11 - Mar 19^th, 2009 at 11:08am This is actually out in the open. https://www.idirect.net/libraries/cm_software_releases/MRTG%20Tech%20Note%2011_2...
Back to top	IP Logged

dot Senior Member ★★★ Offline Posts: 118	Reply #12 - Mar 22^nd, 2009 at 3:19pm When creating the OID to query, have you determined the correct DID for a particular remote site in your network? You will see the DID displayed in iBuilder, on the first tab for the site in question. The document uses an example of a 5350 satellite router with serial number 4022 whose derived ID is 6819766. You will not have this device on your network.
Back to top	IP Logged

taivna

Member
★★
Offline

Posts: 8

Reply #13 - Mar 25^th, 2009 at 9:22am

hi i installed mrtg tnan error detected.

so anyone help me !!!

SNMP Error:
no response received
SNMPv2c_Session (remote host: "122.201.31.225" [122.201.31.225].161)
community: "public"
request ID: 615095964
      PDU bufsize: 8000 bytes
   timeout: 2s
   retries: 5
   backoff: 1)
at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 490
SNMPGET Problem for 1.3.6.1.4.1.13732.1.4.1.1.2.269034 1.3.6.1.4.1.13732.1.4.1.1.8.269034 sysUptime sysName on public@122.201.31.225:::::2:v4only
at /usr/local/mrtg-2/bin/mrtg line 2038
2009-03-25 08:23:59: WARNING: skipping because at least the query for 1.3.6.1.4.1.13732.1.4.1.1.2.269034 on 122.201.31.225 did not succeed
2009-03-25 08:23:59: WARNING: no data for 1.3.6.1.4.1.13732.1.4.1.1.2&1.3.6.1.4.1.13732.1.4.1.1.8:public@122.201.31.225. Skipping further queries for Host 122.201.31.225 in this round.

Back to top

YIM

IP Logged

taivna Member ★★ Offline Posts: 8	Reply #14 - Mar 25^th, 2009 at 9:27am hi novalino. our problem is like. are you solve this problem ?
Back to top	YIM IP Logged

dot Senior Member ★★★ Offline Posts: 118	Reply #15 - Mar 25^th, 2009 at 1:18pm Hello Taivna, what is 269034, is this a DID of a remote? The OID 1.3.6.1.4.1.13732.1.4.1.1.8.269034 should give you total outroute tcp bytes. I suspect you have a problem with the DID you are using or possibly the SNMP version of the get request.
Back to top	IP Logged

taivna Member ★★ Offline Posts: 8	Reply #16 - Mar 26^th, 2009 at 5:18am i think my DID is fine. And problem is other reason. but i don't know this reason. kk
Back to top	YIM IP Logged

taivna Member ★★ Offline Posts: 8	Reply #17 - Mar 27^th, 2009 at 6:45am hey all. are you know "oid-mib-cache.txt"
Back to top	YIM IP Logged

taivna Member ★★ Offline Posts: 8	Reply #18 - Mar 27^th, 2009 at 7:15am hey my snmp version is wrong ???
Back to top	YIM IP Logged

taivna Member ★★ Offline Posts: 8	Reply #19 - Mar 31^st, 2009 at 5:09am hey all now my mrtg is working... kk
Back to top	YIM IP Logged

Pages: 1

Send Topic | Print