Pages: 1

Downgrade from 8.X.X.X to 7.1

(Read 9028 times)

Bouc

Member
★★
Offline

Posts: 16

Feb 10^th, 2009 at 1:28pm

Hello,
I'm working on a 3100 wich was upgraded from 7.X. to 8.X.X by teraterm-winscp because. Now the the 7.1.pkg (cumulative and remote) is failing for downgrade.
It was not possible to use it on the 8.X hub because it is rlocked to the 7.1. Can somebody help on the process of downgrading this.
are there things I can delete in some directories under winscp?????
please Help!
Bouc

Back to top

IP Logged

Ex Member Ex Member	Reply #1 - Feb 10^th, 2009 at 10:22pm If that remote was rlocked to 8.x you will need to talk to iDirect to unlock. Rolling it back to 7.1 will not crack it.
Back to top	IP Logged

Bouc Member ★★ Offline Posts: 16	Reply #2 - Mar 10^th, 2009 at 3:38pm I have I installed the 8.2.2.pkg with redbot (winscp and teraterm), it could not work as it was rlocked to 7.1. Now I we have agreed to convert to a dedicated C-band. the downgrade to 7.1 from the 8.XX is failing. I have tried several times and I think the remote has excess of files in the memory... can someone help with a way of downgrading this please?
Back to top	IP Logged

Ex Member Ex Member	Reply #3 - Mar 10^th, 2009 at 7:28pm Provide me some details on what it is doing. What leads you to believe it is failing? Also what version of iSite are you using?
Back to top	IP Logged

Bouc

Member
★★
Offline

Posts: 16

Reply #4 - Mar 11^th, 2009 at 9:08am

I do have Isite 8.2 and 7.1.
I also have the cumulative and remote 8.2.2.0 pkg,
I also have the NM images and 7.1.pkg so
with Isite 7.1. cumulative and remote update and opt file are downloaded successfully, after the rebooting of the modem, the falcon --version remain 8.2.2.0... looking strange to me.
is there another way to downgrade it like I upgraded it in redboot?
thanks for the help!
Note: the remote is 3100NB
Bouc

Back to top

IP Logged

Ex Member

Ex Member

Reply #5 - Mar 11^th, 2009 at 11:21am

If that remote is still locked (rlock) I recommend you resolve that issue first (if you havent already). �

You stated that falcon remains 8.2. Have you tried to load (with iSite) or CAT an options file into it (from command line)? �The opt will remain 8.2 until you load a new one (no secret there!)

Have you been able to confirm that the 7.X cumulative_update and image were successfull? �Recommend you telnet to the box and check the version to confirm that the update and image successfully made it onto the unit. �

M

Back to top

IP Logged

Bouc

Member
★★
Offline

Posts: 16

Reply #6 - Mar 12^th, 2009 at 1:26pm

In Isite, cumulative update, remote pkg and new opt files are downloaded successully, after reset under settings and statistics the software version remains 8.2.2.0; option file only is loaded but not images...
-- After rebooting only "power" is 'on'... on hyperterm I can stop falcon running, cat the new opt file and paste the old provided with the 8.2.2.0 image to get the modem accessible with Isite... at this step RX and Net are constantly on (not flashing)

So, Is it possible to load the 7.1.1.pkg with hyperterm or teraterm in redboot as I upgraded to 8.2.2.0?
I'll be very happy to get whatever process (solution) will bring this modem ready for new pointing for c-band.
Thanks in advance for the help

Back to top

IP Logged

Ex Member

Ex Member

Reply #7 - Mar 13^th, 2009 at 2:26pm

Settings and Statistics? �Observed through where? iSite?

If you can get into falcon, what does the version command yield from a telnet session to the iDU?

If the "version" command yields 8.2.2 after you load the packages, then you will definitely need to manually load the pkg's with WinSCP, extract, and execute them from command line. �

If you have a copy of iDirects "How do I recover iNFINITI remotes" bulletin" that PDF should contain the procedures for SCP'ing the files on the box, setting the perms, and executing them.

If you search for "How do I recover iNFINITI remotes" you will find the document. �I will not post a URL in this forum because I don�t have permission from the website to link their documents.

Back to top

« Last Edit: Mar 14^th, 2009 at 1:12pm by N/A »

IP Logged

Bouc Member ★★ Offline Posts: 16	Reply #8 - Mar 16^th, 2009 at 6:44am Thanks man, the modem is down and ready to be activated even if it's still rlocked. I'm very grateful to you... God bless you
Back to top	IP Logged

Ex Member Ex Member	Reply #9 - Mar 16^th, 2009 at 10:55am Great. Hope everything works out for you... M
Back to top	IP Logged

Bouc

Member
★★
Offline

Posts: 16

Reply #10 - Mar 17^th, 2009 at 4:13pm

I can say things are going 60% because... rlock is off. the remainin issue is that remote is now locket at NSS10 but when I connect the BUC cable RX begins flashing (green)...
in Isite telnet it shows constantly Locked then unlocked for ever as it's flashing.... I'm still wondering if it's a BUC problem or NOC problem...
Plaese I'll be grateful if you can help on this....
B.

Back to top

IP Logged

Ex Member Ex Member	Reply #11 - Mar 17^th, 2009 at 5:28pm Can you provide me the below info from your Options file: [ODU] music_present = odu_rx_dc_power = odu_rx_10_mhz = odu_tx_dc_power = odu_tx_10_mhz = odu_disable_tx_pwm =
Back to top	IP Logged

Bouc Member ★★ Offline Posts: 16	Reply #12 - Mar 17^th, 2009 at 5:32pm below is the info: [ODU] music_present = 0 odu_rx_dc_power = 1 odu_rx_10_mhz = 0 odu_tx_dc_power = 1 odu_tx_10_mhz = 1 odu_disable_tx_pwm = 0 B.
Back to top	IP Logged

Eric Johnston

Senior Member
★★★
Offline

Posts: 2109

Reply #13 - Mar 17^th, 2009 at 5:57pm

Quote:

the remaining issue is that remote is now locked at NSS10 but when I connect the BUC cable RX begins flashing (green)

Check the BUC coax cable for short and open circuit using a DC volts/ohms meter. �Take care not to short the modem DC power supply voltage.

Check that the outer wire braid of the BUC coax cable is connected to the outer part of the F type plug at both ends. �The centre pin wire should be 1.5mm proud of the rim. �When you screw in the F connector, be sure that the pin goes smoothly into the socket and that the cable sheath and braid do not push back.

Best regards, Eric.

Back to top

IP Logged

dot Senior Member ★★★ Offline Posts: 118	Reply #14 - Mar 22^nd, 2009 at 3:15pm If I understand correctly your Rx LED is flashing (not a constant green)? This indicates that you have a problem with your Rx cable, connector or LNB. Is the LNB stability parameter at your hub correctly configured?
Back to top	IP Logged

Bouc Member ★★ Offline Posts: 16	Reply #15 - Mar 24^th, 2009 at 12:04pm Men, Thank you for your replies... the teleport guys told me it's a problem of transmit reject filter! Funny!!! when an other modem works fine on this new linear feed, mine can not. Any other way to bay pass this??? Bouc
Back to top	IP Logged

Pages: 1

Send Topic | Print