Antesky 3.7meter antenna dish installed in Australia

(Read 315 times)

Antesky Vicky

Member
★★
Offline

Posts: 44

May 30^th, 2024 at 2:57am

Previously, we mentioned that every year we will prepare regular stock for receive only antennas, flyaway antennas and VSAT antennas, so that we can arrange shipping to clients destination with the fastest delivery time. Here one of regular clients from Australia ordered 1 set of 3.7m TVRO antenna and 2 sets of 3.7m earth station antennas from Antesky in last November and we shipped out this 3 sets of antennas in early December 2021.

In July, client firstly finished installation on their site and told us antenna operate well now. They shared with us various photos which were taken during their installation. You can clearly see that our TVRO antenna structure including foundation part, kingpost part, reflector part and feed system, which makes our antenna can be assembled easily and quickly based on provided detailed installation manual. Installation guide service by engineer remotely is available as well.

Copyright © www.antesky.com
Hoisting reflector of 3.7m TVRO antenna to kingpost by crane
The reflector is supported by a galvanized steel kingpost that provides the required stiffness for pointing and tracking accuracy, and it can be installed on the ground or rooftop. Foundation as a kind of necessary part, it is important for all antenna system performance. Generally, client is tend to cement pouring foundation for fixed site installation. Due to some instructions, we also have non- penetrating foundation(NPM) for options, which can resist high wind as pouring foundation and can be moveable to another site if necessary.

3.7m TVRO antenna reflector with kingpost
Also, the reflector manufactured with high quality aluminum and steel materials, is with high rigidity. The antenna reflectors can bear two persons to stand on, so the installers can stand on the antenna reflectors without any worry during installation and debugging. Even the antenna performance can not be affected. Here you can see that client are installing antenna feed with standing on reflector.

Install feed of 3.7m TVRO antenna

Antesky Science Technology Inc
TEL: 0086-29-88352448

WWW | Skype/VoIP | MySpace | Facebook

IP Logged

Admin1 YaBB Admin ★★★★★ Offline Posts: 1206	Reply #1 - Jun 7^th, 2024 at 9:07pm They are nice pictures but I have had complaint that the people should be wearing hard hats. When lifting antennas items like loose tools, nuts, bolts, washers etc do fall down and cause injury. Please emphasis safety to your workers. Best regards, Eric
Back to top	WWW IP Logged

Antesky Vicky Member ★★ Offline Posts: 44	Reply #2 - Jun 17^th, 2024 at 4:31am thank you for your comment. we will tell client and in our manual will focus on worker safety much.
Back to top	Antesky Science Technology Inc TEL: 0086-29-88352448 WWW \| Skype/VoIP \| MySpace \| Facebook IP Logged

Pages: 1

Send Topic | Print

Disclaimer, Terms of Use and Privacy Forum User Agreement Forum rules Cookie policy.