SatSig topic:

telnet password unlock

(Read 26539 times)

Dec 7^th, 2004 at 8:08am

we are trying to reset the password on a linkstar terminal. We made a serial cable to rj11 connection from a PC to the linkstar but could not still establish a connection.
We think we need a host name for this and possibly have not got the procedure well
Please we need your help and suggestions

Dec 8^th, 2004 at 1:18pm

pls try to be more expilicit.
did you connect a cross over cable to the linkstar modem and convert the macaddress well enough.
Please bear in mind that most recent product line of the RCST uses the following default ip add to telnet into the RCST 10.1.-.- unlike the former 10.0.-.-. take caare of this to know if it can solve ur problem.
But you can explain what you want to achieve in details so we can know a way to help.

Nnaemego Obiora
234-8045042224
nnaemego@yahoo.co.uk

Dec 8^th, 2004 at 11:57pm

LINKSTAR Modem - Password Unlock
Telnet Password Unlock Procedure

If you have forgotten your password for full Telnet Access, please use the following sequence and procedure to unlock the system. If your unit is under a lease agreement you may not be authorised to do this, doesn’t apply to owned devices. Make one of these cables, and open the RCST. Inside there is a serial connector to which you can connect using this cable decribed below.

Once you connect, you can get direct access, and use the
passwd -u root -p newpassword command to reset it.

Linkstar Serial Cable

Only the middle 4 pins are used (use a 4 pin connector phone plug) Looking at the phone plug with the clip facing away from you.

pin 1 goes to pin 5 on the serial connector
pin 2 goes to pin 2 on the serial connector
pin 3 goes to pin 3 on the serial connector
pin 4 not used

some loopbacks on the serial connector

7 and 8 are looped
1 and 4 are looped
6 and 4 are looped

Dec 29^th, 2004 at 3:46pm

I will also help if you provide us several other further informations.

Jan 6^th, 2005 at 7:11pm

Hello,

Please be sure to have my support if you need one. we have unlocked several modems many times.

Regards'

Ben

Jan 9^th, 2005 at 4:05pm

hi every one i need help please
my linkstar from yesterday dont work
it's only show me the power led
no tx rx or ethernet work !!!!
what' happen and how i can resolve this problem
NB: i have unlocked this linksat since 3 moth ago and it work correctly

if there any flsh procedure or any procedure to reset to a factory setting i need a fast help please

Jan 12^th, 2005 at 11:02pm

hi

i would to unlock my linkstar but i dont know where i put my cable .because when i have open trhe terminal i have found many port tahnks.

Jun 20^th, 2005 at 4:46pm

Hello Linkstar Unlock,

Please put your name next time.

Where are you located, I could get some local engineers to help you fix the rcst.

Ben

Jun 23^rd, 2005 at 8:54pm

hi

I am trying to open Linkstar modem but I could not

I log in as guest and I can not change the setting of the modem

by the way I tried the COM-->RJ11 cable connection and it did not work AND THE Connection of the pin as following

COM RJ11
Pin 5 Pin 1
Pin 2 Pin 2
Pin 3 Pin 3
not connectrd Pin4

and I used 4 pin telephone plug

when I connected them and switch on the modem it started to read but I could not type any thing after that

I have a copy from the responce of the modem if you want me to send it to you

Please could you help me and if you have an software can you please send to me

Thanks alot

Ezdeen

Aug 14^th, 2005 at 10:05pm

Dear Sir

I need telnet command for UNlock Linkstar password

Bast Regards

Aug 17^th, 2005 at 9:00pm

The command is: passwd [old password] [newpassword]

but be aware to log in as as admin the change it

Regards

Dec 3^rd, 2005 at 9:17pm

Quote:

Dear Sir

I need telnet command for UNlock Linkstar password

Bast Regards

Jan 30^th, 2006 at 3:26pm

Just so everyone knows for future reference. When the instructions tell you to LOOP the wires it means to LOOP the wires. The programing will not work properly unless it reads the connections as they are suppost to be.
Learned From Mistake!

Feb 5^th, 2006 at 2:01pm

I know how to unlock the link star terminal.

I have the cable and the commands.

If you need more, contact me at: info.afghanictsolution@gmail.com

thanks

Mar 14^th, 2006 at 9:58am

plz help to know how to full telnet and unblock a linkstar modem

Oct 24^th, 2006 at 7:25am

Dear Friends,

We offer to unlock your LinkStar terminals from teleport side. Just direct your terminal to W3A and inform us about its MAC address.

We will definitly release it easily.

Regards

Nov 8^th, 2006 at 9:31pm

I found out that you had some problem in December 2004 unlocking a linksat modem, I want to know if you're able to resolve the problem, and if you did, how?

I had a linksat modem, that I purchased from an ISP, I was able to unlock the RCST, but I can not get the modem activated by my new ISP, we're now thinking that maybe this first ISP have a PIN on the modem, which sounded like what you went through in 2004.

Please if you're able to resolve the problem, or you know how we could resolve the problem.

I would be obliged if you could give me any assistance to finally complete the unlocking of the modem to be able to use it.

Nov 21^st, 2008 at 12:51pm

Hello,

I think everyone's problems are sloved because i can unlock your linkstar modems locked by the ISP or from your old ISP. it is not a problem just email: acue_links@yahoo.com or call 234-7064801198

Note: We are here to help you fix your problems, also note that we unlock a mac once. Try to be good so that your modem will not be lock next time.