|
Nov 21st, 2006 at 11:19am
Hi mani, Aluminum dish is always better, but try to check your present dish fault 1st, why it is not giving enough gain/signal, if its size is small then you must change otherwise try to fix it. it is not big deal but need some patience , following are main points 1- is there any tree / building covering ur dish front 2-how it was working when first installed, if it was good then you must need only adjustment. like feed horn or dish position realignment, cable conectoer retightening etc Try to get help from some experience installer 3- is dish very old, how its curve structure,
|