STRANGE BEHAVIOUR ON IDIRECT MODEM.PLS I NEED HELP

(Read 3729 times)

Jun 17^th, 2007 at 4:00pm

I HAVE A 2.4 METERS DISH, C-BAND, 5 WATT BUC, IDIRECT 3000 AND 5000 SERIES. IM TRYING TO LOCK ON TO NSS7. I HAVE MY RX LOCKED BUT I CANT TRANSMIT, I HAVE CHECK THE CABLE, THE CONNECTOR, THE BUC.... I MEAN EVERYTHING THAT HAS TO DO WITH THE TRANSMIT YET STILL DONT HAVE TX LOCK. I HAVE RELOADED THE IMAGE FILE AND OPTION FILE TO NO AVAIL. PLS I NEED SOMEONE TO HELP OUT. MY CLIENT IS ON MY NECK RIGHT THREATENING TO REVOKE THE CONTRACT.
THANKS,
SAM

Jun 20^th, 2007 at 10:30am

Have you managed to sort the problem out? If not, could you send me a pic of the installation?

Jun 20^th, 2007 at 11:59am

THANKS FOR YOUR RESPONSE. PLS SEND ME YOUR MAIL ADDRESS TO ENABLE ME SEND U THE PIC OF THE VSAT INSTALLATION.
tHANK,
Sam

Jun 23^rd, 2007 at 6:17pm

After getting rx lock on the modem do you contact your ISP or Satellite provider for Cross pol and 1db Compression Test ? You can contact me for more troubleshooting tips on my Y! Messenger-

lukinguy@yahoo.com

Jun 25^th, 2007 at 1:12pm

check your option file.

check the longitude and latitude , make sure they are correct and not mixed up

ensure that the BUC is turned on

i had a similar situation and those steps helped.

regards
shaibu
sbemabino@yahoo.com

Jul 11^th, 2007 at 7:39pm

Is your problem fixed?

Could be you have the polarity wrong and you need to rotate the BUC from horizontal to vertical or vice versa.

Is the modem putting out correct voltage on the TX port? Do you have the same, or very close voltage at the end of the cable, by the BUC?

If so, then the BUC is probably bad. Did you try a "known good" one?

Pat

Dec 14^th, 2007 at 8:01pm

Hi Guys...

I think the BUC LO Frequency on the profile used when making an option file might be wrong.....
Can you confirm the make of your BUC and part number....

Regards,

Email me:eric@satsig.net

Disclaimer, Terms of Use and Privacy

Old Forum rules

Cookie policy.