SatSig topic:

IPCop linux blocked iSite what i can do?

(Read 3675 times)

Jun 18^th, 2007 at 2:21am

Recently I installed IPCop on PC as cache server to speed the things a bit faster ....

But i face problem with iSite, I can log in but nothing elese, I just can see the configuration page only.
I need to see IP stats page but it disabled ...
when i connect my pc directly without ipcop (Through wireless Access point) to the modem everything okay, even the modem appear directly without need to chose new from file menu and enter the ip , i just chose login,

It seems like IPCop block some port that modem need to be open.

Any one have experience this with IPCop linux ?
Which port iSite use to connect with the modem ?

Jul 2^nd, 2007 at 8:19pm

Look Sir, I don't know much More about the IPCOP linux but i had the same problem when i Connect the iDirect modem with ISA server

what i want to say ..if you connect the iDirect modem to any caching server you will face the same problem,
So, to avoid this when you need to See your modem configuration, just connect it by Cross Cable Directly.

Jul 4^th, 2007 at 4:08pm

Thanx ahmedmaher30 for your reply ,,,

The problem solved by Portforward .
The port number is 9001 udp .